Friday, May 22, 2009

How to Measure and Cut Needlepoint and Crosstitch Canvas

When I went looking for a link to include in an AntiCraft article about how to measure and cut canvas for counted needlepoint, I found exactly two. They were both by the same person, and they were both Wrong. (Seriously, I'm still spluttering over just how wrong!) None of the sites devoted to needlepoint and cross stitch seem to realize that before you can get to "step 1: bind the edge of the canvas to prevent fraying," you have to figure out where that edge should be.

So, I'll tell you. Isn't that kind of me? ;)

There are many different kinds of canvas that can be used for needlepoint. You can even use plain woven fabric if you're a masochist expert. But, if you're new enough to stitchery that you don't already know how to measure your canvas for your project, you'll most likely be using aida cloth, so that's what I'll talk about here.

Aida cloth comes in many different "counts" or "points," which refers to the size of the weave. A point is the space for one stitch in basic continental or cross stitch; it's where the vertical threads and the horizontal threads intersect. The number of points refers to the number of stitches you can make over one inch. 11 count aida will have 11 stitches in one inch. 16 count will have 16 stitches in an inch, and so on. It's possible the canvas may be a point off here or there, but unless you're planning to stitch a wall-sized tapestry, it probably won't be enough of a difference to matter.

If you have purchased your pattern from a regular pattern company it may tell you how many stitches high and wide the design is. If you can't find this information you'll have to count the stitches yourself. If the design is not a regular shape, be careful to count from the very lowest stitch to the very highest, and from the left-most to the right-most. Write these numbers down.

Now, divide each of these numbers by the count of your fabric. For example, lets say that our pattern is 200 stitches high by 150 stitches wide.

On 11 count aida:
200/11 = approx. 18 inches high
150/11 = approx. 14 inches wide

On 18 count aida:
200/18 = approx. 11 inches high
150/18 = approx. 8.5 inches wide

On 22 count aida:
200/22 = approx. 9 inches high
150/22 = approx. 7 inches wide

You can see that the higher the count of the canvas, the smaller the pattern will be when it's finished.

So, that's how you figure the size of your stitched area, but it's not the size you want to cut your canvas. Once you have your stitched size, you want to add a minimum of 3 inches to each side (adding 6 inches total to each dimension), possibly more, depending on the size of the stitching frame or hoop you'll be using. Using our 200 by 150 stitch example:

On 11 count aids:
18" + 6" = 24" high
14" + 6" = 20" wide

On 18 count aida:
11" + 6" = 17" high
8.5" + 6" = 14.5" wide

On 22 count aida:
9" + 6" = 15" high
7" + 6" = 13" wide

That's the size, at minimum, you cut your canvas. Any less and you'll risk not having enough room at the edges to mount the canvas in a frame or hoop to work the design completely, or to mount or sew the finished design into the display frame or other project for which you've stitched it.

Now you can proceed to "step 1: bind the edge of the canvas to prevent fraying."

Let me know if you need help with that, too. ;)

Thursday, May 21, 2009

Just Checking In

I know, I know, I haven't posted anything in over a month. Well, I've been busy leading hoodoo practitioners in making portable altars out of cigar boxes:

sorry, I seem to have lost the color version

learning about "or nue" embroidery:

click to learn how this was made

and working on my project for the next issue of the AntiCraft:


Whoops. Oh well.

Anyway, I just wanted to let you all know I'm still here, and still crafting my fingers to the bone. Now, if I could just get paid for all this crafting...